Field of Application

 - very, very fast cloning tool
 - easily to use, even from non technicians
 - clone drives even with defect sectors (as long as a drive is accessible)
 - supports 1x SATA (also SSD) or IDE source drive
 - supports 1 x target ports: SATA (also SSD) or host PC
 - create a 100% 1:1 clone with one cloning operation (multi pass)
 - supports (tested) SATA adapters for modern storage (SSD), i.e. mSATA,
    SD Card, M.2 NGFF, MacBook, Zenbook, Lenovo Carbon Ultrabook etc.

 - write protection for the source drive

 - hash calculation for source drive + target drive while cloning
    possible standards: MD5, SHA1, SHA224, SHA256, SHA384, SHA512
 - create . img image files to any int./extern. drive of the host PC

Data Recovery
 - clone drives if still accessible and retrieve data from clone drive.
    if a clone doesn’t show partitions and/or data, use a data recovery software
    to surch and retrieve files + folders.
 - supports: NTFS (all versions), Ext 2/3/4, HFS, HFS+, HFSX, ExFAT, FAT16, FAT32

 - create + write .img image files to any int./ext. drive of the host PC

Raid Recovery      
 - create a clone of all
original raid drives
 - mark the original drives + the corresponding clones with the position number
    where inserted in the raid hardware
 - if the original raid hardware is working properly, replace all original drives with
a corresponding
clone and then try to rebuild the raid with the on board solution
    (if exist) of the raid hardware.

 - if that doesn’t work, connect the clones in its correct order to a PC and try to
    retrieve the data with a special raid data recovery software.

Computer + Laptop Repair service
 - all above points for Data- and Raid Recovery + Forensics    

plus repair of defect Windows systems caused from defect drives:     
 - create a 1:1 clone of the defect drive           
 - use
the new clone driveto replace the old defect drive and start the computer.
    If that doesnt
work, try to start the laptop manufacturers Windows recovery, otherwise
an OEM Windows (corresponding to the license type) + drivers.
    Finally copy the customers data
from the 2nd clone to the recovered Windows system.
 - If the clone doesn’t show partition
or data, you need to use a data recovery software
     to surch and retrieve the customers data.